Click to enter RL Acoustique Online!   
 


The Reps 1 represents state of the art in full range drivers. Precice machining with exceptionally tight tolerences and carefully chosen components have produced the finest full range driver ever. A new level of transparency and realism are now Reps R-1obtainable.

The Alcomax 5 magnet, in conjunction with the cobalt alloy pole cap, produces 20,000 Gauss and 100 dB/W at 1 m. This is the strongest type of alnico motor that can be reliably manufactured.

The voice coil is a most geometrically effective design. It is double wound and interleaved around one of the strongest papers available at only 0.075 mm ( 0.003" ) thick.

The cone, which is exceptionally light and rigid, is made of paper and specially treated for humid climates.

This type of design and construction assembled meticulously allows the driver to surpass all other designs.

The massive motor/low mass cone topology of the REPS R-1 faithfully reproduces the minute details of original music with less than five watts of input

S P E C I F I C A T I O N S
Drive Unit Size: 200 MM Nominal
Frequency Response, Box Dependent 40Hz to 20,000Hz +/- 3dB
Sensitivity, 1 Watt at One Meter: 99.8 dB
Power Handling, Sine Wave: 55 Watts RMS
Suggested Amplifier Power: 2 to 45 Watts RMS
Distorion at 100 dB SPL: Less than 0.15%

Electrical Specifications
Speaker Parameter Measurement Data (SPM)
Method: Delta Compliance Curve Pair

Free Air Curve Num = 13 Name = REPS 1 LIGHT FREE-AIR
Delta Comp Curve Num = 14 Name = REPS 1 LIGHT BOX 29L

Volume of Test Box = 29.00 Liter = 1.02 cuFt

Electrical / Mechanical Parameters
Revc (DC VC Res) =
6.4 Ohm
  Qms (Mech Q) =
5.98
Fo (Res Freq) =
39 Hz
  Qes (Elec Q) =
0.107
Zo (Zmax at Fo) =
371 Ohm
  Qts (Total Q) =
0.105
Sd (Piston Area) =
0.0206 sqM
  Vas (Acous Vol) =
101.29 litr
BL (Flux*Length) =
12.1 TM
  Cms (Compliance) =
1680.8 uM/N
no (Ref Effncy) =
5.4 %
  Mms (Total Mass) =
9.96 Gram
SPLo (SPL at 1W) =
99 dB
  Mmd (Diaphm Mass) =
8.26 Gram

Motor Impedance Parameters
Levc (Induc at 1kHz) = 0.446 mH   Rem (Res at 1KHz) = 2.14 Ohm
Levc (Induc at 20kHz) = 0.065 mH   Rem (Res at 20kHz) = 9.93 Ohm
Krm (Resistance Cons) = 24.077 mOhm   Erm (Resis Expont) = 0.52
Kxm (Reactance Cons) = 121.332 mH   Exm (React Expont) = 0.36



© 2001 RL Acoustique